Resultado de búsqueda
21 de ago. de 2014 · If your gateway is running MGCP and registered to CUCM, no dial peers on the gateway are used and whatever is sent from CUCM is passed along as the called number as CUCM controls the MGCP gateway. If your gateway is running H323, then you need both.
POTS dial peers are router configuration structures th at point calls to a particular voice interface based on whether the dialed number matches certain criteria (as specified in the dial peer’s destination-pattern ).
1 de dic. de 2016 · A Cisco Unified CME system is extremely flexible because it is modular. A Cisco Unified CME system consists of a router that serves as a gateway and one or more VLANs that connect IP phones and phone devices to the router.
In Cisco CME 3.4, support for connecting and provisioning SIP phones was added. The default codec of the POTS dial peer for an SCCP phone is G.711 and the default codec of a VoIP dial peer for a SIP phone is G.729.
The ip address trusted list allows any SIP address to contact the router. This really just makes things easier for labbing. If you don’t do this then only IP addresses defined in dial-peers will be able to contact the router with SIP traffic. The allow-connections sip to sip enables SIP connections. Since we are only dealing with SIP at the ...
Este documento describe los pasos para configurar Cisco Unified Communications Manager Express (CUCME/CME).
CME is connected to CUCM at HQ via a SIP trunk between BR2 router and HQ router (CUBE). I have a 7942 (SCCP) at BR2 that can place and receive calls from CUCM at HQ. I also have a 9971 at BR2 that can receive calls from CUCM but is unable to connect calls to CUCM.
