Resultado de búsqueda
Connect SMPTE (LTC) To synchronize the console with an SMPTE timecode source, connect an SMPTE source to the console. If you send 29.97 or 30 drop frame, it will be interpreted as 30 fps. The signal strength should be a minimum of 200 millivolts. Connect the SMPTE source to the LTC IN connector on the rear panel.
This tutorial explains how to use RD/ShowCockpit to translate LTC Input from the sound card to MTC (MIDI Timecode) and have MA2 OnPC synced with that timecode.
Analog Remote. The Analog Remotes tab is used to configure the DC Remote Control input on the back of consoles, RPU, and onPC Command Wings. The consoles and the RPU has 16 contact closure inputs. The onPC Command Wings has 12 contact closure inputs.
LTC can only be received by command wings or consoles. It comes thru a xlr cable into the back panel. MTC can be received by ONPC, but you will need a third party software to "connect" reaper to ma2. An audio signal must still be sent to the FoH Soundengineer.
LTC Input to GrandMA2 OnPC, using your sound card as input. RD/ShowCockpit is used to translate LTC to MTC, and a virtual MIDI Loopback device connects the MTC signal to MA2 OnPC. Download and try it: https://showcockpit.com/. See less.
26 de feb. de 2013 · You can buy hardware to convert ltc to midi time code. Various options available - some of the old jlcooper range can be picked up very cheaply!
Installation of grandMA2 onPC To run the grandMA2 onPC software, it is necessary to copy and install the program files on your PC. standard directory It is possible to perform the installation in every root directory or in the "C:\ProgramData\MA...
